|
IR116
Standard Duty
Air Hammer
The economical air hammer for fast cutting action, especially for medium exhaust system, panel cutting, and general repair work.
- Up to 3500 blows per minute
- Handles a range of cutting applications
- Longer life alloyed steel barrel and heat-treated piston
|
|
IR117
Standard Duty
Air Hammer
An economical air hammer with a longer piston stroke, this tool is designed for exhaust work, bolt cutting, and front-end work. The trigger control and a built-in power regulator give you full control of the speed and power.
- Longer stroke piston
- Alloyed steel barrel and heat-treated piston for longer life
- Up to 2000 blows per minute
|
|
IR121
Super Duty
Air Hammer
Make fast work of body panel crimping and cutting, bushing, driving, shearing and general front end work with this air hammer, a super duty tool that produces up to 3,000 blows per minute.
- Professional touch trigger for total control
- Long-life tool with a tough one piece alloy barrel
- Easy to maintain, with and "easy out" throttle valve assembly
|
|
IR132
Super Duty
Air Hammer
Professionals who want the best choose this tool for front end work, heavy exhaust work, riveting, king pin removal, bushing driving, and bolt shearing.
- Extra-sensitive tease throttle controls starting strokes
- Up to 1725 blows per minute
- Longer stroke piston
|
|
IR125
Standard Duty
Needle Scaler
For surface preparation work involving the cleaning or removal of paint, rust, dirt, or weld slag, the IR125 is a durable, dependable, economical solution.
- 19 needles
- Each needle 1/8"
- 4600 blows per minute at free speed
|