Ingersoll-Rand
BC Series Beam Clamp
1 - 10 metric ton Capacity
Features:
Beam Clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. These units have been designed and verified, by actual pull testing, to achieve minimum design factor of 5:1 for vertical lifting with powered or manual hoist meeting ASME B30.16. Quick and simple installation is achieved by hand without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.- Quick installation by hand
- Low headroom design adjust to fit a wide range of flat or tapered beams
- Meets ASME B30.16 for use with powered or manual hoists
- Each unit is serialized, supplied with a test certificate and manual
- Metric rated for vertical lifting at 2200 lbs per ton
| Model | Capacity (tons) |
Weight (lbs.) |
Beam Width (in.) |
| PT005A | 1 | 4 | 2 15/16 - 9 1/16 |
| PT010A | 2 | 5 | 2 15/16 - 9 1/16 |
| PT020A | 3 | 9 | 3 5/32 - 12 5/8 |
| PT030A | 5 | 11 | 3 9/16 - 12 5/8 |
| PT050A | 10 | 11 | 3 9/16 - 14 3/8 |