Ingersoll-Rand
P Series Puller
1000 to 2000 lbs. Capacity
Features / Wire Puller:
- 4:1 design factor, Meets ASME B30.21.
- Handle and frame are heavy gauge steel with rivet construction and slip-resistant grip. All steel parts are plated for years of useful life.
- Exclusive long life "buttress tooth" cast gear design has no laminated plates to separate pr wear and provides maximum strength.
- Sturdy steel drive and holding pawls have long life, stainless steel springs. All pivot points are hardened steel.
- Safety latch hooks are drop forged steel, heat treated and plated for corrosion resistance. Top hook rotates 360° for easy operation.
- Cast-aluminum drum has a "through-the-drum" anchor, larger diameter and a drum guard. This means the wire rope won't come loose, bends less so it lasts longer and spools evenly while rewinding.
- Galvanized aircraft quality rope is preformed to prevent kinks.
- One year warranty.
Features / Rope Puller:
- Two models with either 20 or 75 foot rope length.
- Standard with oversized 5/8 inch diameter high strength polyester rope.
- Rope has less chance to mar surfaces or kink and is easier to manage than wire cable.
- Rope is non-conductive and can be stored or used separately.
- Rope pullers can handle long pulls or reaches limited only by the length of rope available.
- The Ingersoll-Rand rope pullers is easy to pay out rope and will not bind with the rope in the drum after pulling a load.
| Model | No. of Lines |
Rated Cap. Lifting 4:1 (lbs.) |
Min. Dist. Btwn Hooks (in.) |
Lifting Distance (ft.) |
Cable Diameter (in.) |
No. of Hooks |
Net Weight (lbs.) |
| P15H | Single | 1000 | 19 1/2 | 15 | 3/16 | 2 | 8 |
| P15D3H | Single | 1000 | 21 | 15 | 3/16 | 3 | 10 |
| P15D3H | Double | 2000 | 27 1/2 | 7 1/2 | 3/16 | 3 | 10 |
| PR-25 | Single | 11000 | 24 | 23 | 5/8 | 2 | 10.8 |
| PR-75 | Single | 1100 | 24 | 73 | 5/8 | 2 | 17.4 |