Phone: (604) 576-9441
Toll Free: (866) 576-9441

Ingersoll-Rand

ThermoZorb Heatless Regenerative Desiccant Dryers (TZ)
(200+ CFM)

tz
The ThermoZorb Series dryer is a heatless desiccant dryer made up of two ASME vassels filled with desiccant material, which are assembled together with inlet and outlet manifolds. One chamber is in operation (dryer), while the opposite chamber is regenerating using the pressure swing adsorption (PSA) method. A small volume of the dried compressed air is used to regenerate the saturated desiccant bed by expanding dried air from line pressure to atmospheric pressure, removing the water absorbed by the desiccant material. These dryers are supplied with mounted filters.

All models are supplied with 115V-1Ph-60Hz electrics. Ratings are based on a 100° F inlet air temperature, 100 psiG inlet air pressure to deliver a -40° F pressure dew point. Maximum inlet air temperature is 120° F, and maximum inlet air pressure is 150 psi. Specifications
Model CFM Capacity
Nm3/min
Pipe
Conn.
(in.)
Dimensions
L x W x H
(in.)
Weight

(lbs.)
TZ100 100 2.87 1 69 x 22 x 35 310
TZ160 160 4.53 1 73 x 22 x 37 420
TZ220 220 6.23 1.5 83 x 22 x 41 640
TZ300 300 8.50 1.5 72 x 28 x 47 830
TZ400 400 11.33 1.5 84 x 28 x 51 1100
TZ500 500 14.16 2 77 x 30 x 56 1400
TZ600 600 17.23 2 87 x 30 x 56 1700
TZ820 820 23.22 3 FLG 106 x 30 x 60 2150
TZ1050 1050 29.73 3 FLG 106 x 34 x 60 2500
TZ1200 1200 34.47 3 FLG 118 x 34 x 60 2900
TZ1450 1450 41.65 3 FLG 119 x 37 x 64 3200
TZ1710 1710 49.11 4 FLG 119 x 37 x 64 4100
TZ2000 2000 56.64 4 FLG 126 x 45 x 80 5600
TZ2350 2350 66.55 4 FLG 119 x 45 x 80 6300
TZ2750 2750 77.87 4 FLG 130 x 58 x 89 7500
TZ3400 3400 96.28 4 FLG 132 x 58 x 93 9300